top of page

Thermal Imaging for Hospitals and Hotels in South Florida

5 days ago
4 min read

Most electrical failures give a warning before they happen. A loose lug, an overloaded breaker or a failing connection runs hot for weeks or months before it burns up. You cannot see that heat with your eyes, but an infrared camera can. That is what thermal imaging is for, and in a hospital or a hotel it is one of the cheapest ways to avoid a very expensive day.

We do infrared thermal imaging on commercial electrical systems across Broward, Palm Beach and Miami Dade. Here is how it works and why hospitals and hotels should have it on the calendar.

What thermal imaging actually finds

An infrared scan shows the temperature of everything in the picture. When we compare similar parts under similar load, the problems stand out. The usual findings are:

  • Loose or corroded connections on lugs, bus and terminations.

  • Breakers or fuses running hotter than their neighbors.

  • Unbalanced or overloaded circuits.

  • Failing contacts in transfer switches and motor starters.

  • Hot spots in transformers and busway joints.

  • Overheating on HVAC equipment such as chiller starters, drives and motor connections.

Each finding gets a photo, a regular picture of the same spot, the temperature rise and a priority. The facility team gets a report they can actually work from.

Why hospitals should scan

A hospital cannot afford to lose a panel without warning. The essential electrical system feeds life safety, critical care and equipment branches, and a failure in a transfer switch or a distribution panel can take down a whole wing. Thermal imaging lets you find those weak spots while the system is running, without a shutdown.

It also helps with the paperwork side. NFPA 70B, the standard for electrical equipment maintenance, now calls for infrared thermography as part of an electrical maintenance program. Having a dated report with findings and repairs on file shows the hospital is taking care of its electrical system, which matters when surveyors or insurance carriers ask.

The scan itself is quiet and quick. We work with the facility team so panels in clinical areas get opened at the right time and with the right precautions.

Why hotels should scan

For a hotel, an electrical failure turns into a guest problem fast. A burned main lug in the electrical room can knock out a floor of rooms, the kitchen or the elevators. In South Florida, the cooling load alone keeps a hotel's electrical gear working hard most of the year, and heat is exactly what wears connections out.

Hotels also have a lot of equipment that never gets looked at until it fails: pool and spa panels, laundry equipment, kitchen circuits, rooftop units and the chiller plant. A yearly scan covers all of it in one visit. Fixing a hot connection on a scheduled night costs a fraction of an emergency call on a sold out weekend.

When to scan

A few rules of thumb we follow:

  • Scan under load. Problems only show up when current is flowing. Hospitals and hotels are busy enough that this is rarely an issue, but we time the scan for normal or high load.

  • Scan every year at a minimum. Critical gear like the main switchgear, transfer switches and chiller starters can justify more often.

  • Scan after big changes. New equipment, a renovation or a major repair is a good reason to check that everything was tightened right.

  • Scan before hurricane season. If the building is going to lean on its generator and transfer switches, find the hot spots first.

What happens after the scan

The report is only useful if someone fixes what it finds. We rank every issue so the serious ones get handled first. Many repairs are simple, like cleaning and torquing a connection or replacing a breaker. Others need a planned shutdown, which we schedule around the hospital's or hotel's operation. After repairs, a follow up scan confirms the problem is gone.

Because we hold an electrical license (EC13006438) and an HVAC license (CAC1825204), the same team that finds a problem on a chiller starter or a rooftop unit disconnect can fix it, electrical or mechanical.

Frequently asked questions

Does thermal imaging require shutting down power?

No. The scan is done with the equipment running and under load. Covers come off panels so the camera can see the parts, but the power stays on.

How often should a hospital or hotel do thermal imaging?

At least once a year. Critical equipment like main switchgear and transfer switches may be worth scanning more often.

What does a thermal imaging report include?

Each finding gets an infrared image, a regular photo, the location, the temperature rise and a recommended priority for repair.

Can thermal imaging check HVAC equipment too?

Yes. We scan chiller starters, drives, motor connections and rooftop unit electrical along with the building's panels and switchgear.

Schedule a thermal imaging survey

Pacman HVAC Electric Fire has served commercial buildings across South Florida since 1999 from 751 Shotgun Rd in Sunrise. Learn more about our electrical service team, then call 954.577.7923, Monday to Friday 7 AM to 5 PM, or request a quote.

Comments


Commenting on this post isn't available anymore. Contact the site owner for more info.
bottom of page