top of page

Hotel Cooling Tower Replacement in South Florida

3d
4 min read

Ask any hotel engineer in South Florida what keeps them up at night in August, and the cooling tower will be near the top of the list. When the tower struggles, the chillers struggle, and when the chillers struggle, guests feel it in their rooms, the lobby and the ballroom. Then the complaints start.

Cooling towers in our climate work hard. Heat, humidity, salt air near the coast and long run hours all take a toll. Sooner or later every tower reaches the point where patching it no longer makes sense. Here is how we look at cooling tower replacement for hotels and resorts across Broward, Palm Beach and Miami Dade.

Signs your hotel cooling tower is near the end

A tower rarely fails all at once. It usually tells you it is getting tired.

  • Leaks that keep coming back. The basin, the casing or the piping keeps getting patched, and new leaks show up anyway.

  • Corrosion you can see. Rusted structure, flaking metal and damaged hardware, especially on older galvanized towers near the water.

  • Rising water and chemical costs. A tower that drifts, splashes or leaks wastes water and treatment.

  • Condenser water running hot. If the tower cannot bring the water temperature down on hot afternoons, the chillers work harder and use more power.

  • Fill and drift eliminators in bad shape. Clogged or broken fill cuts the tower's capacity.

  • Fan and motor problems. Noisy gearboxes, vibration and repeat motor failures.

If several of these sound familiar, it is time to compare the cost of keeping the tower going against the cost of replacing it. We wrote more on that choice in our cooling tower rebuild or replace guide.

Why hotels need a different plan

A hotel cannot shut off its cooling for a week while a tower gets swapped. Guests are checking in every day. Meeting rooms are booked months ahead. Restaurants and kitchens need to stay comfortable. So the replacement plan has to start with one question. How do we keep the building cool while the work happens?

Temporary cooling

On some jobs, a temporary tower or rental equipment keeps the chillers running while the old tower comes out and the new one goes in. On others, a hotel with more than one tower can run on the remaining cells while one is replaced at a time.

Timing the work

The best time to replace a tower is when the cooling load is lowest and the occupancy calendar allows it. In South Florida that window is short, so planning needs to start well before the work.

Guest impact

Cranes, noise and crews on the roof all need to be planned around the guest experience. Crane lifts are often scheduled early in the morning, and staging areas are kept away from guest entrances and pool decks where possible.

What a replacement involves

A cooling tower replacement is more than setting a new box on the roof. A good job covers:

  • Sizing. The new tower should match the actual cooling load and the chillers it serves, not just copy the old nameplate.

  • Structure. The roof or pad, the supports and the dunnage have to be checked for the new tower's weight and footprint.

  • Piping and controls. Condenser water piping, valves and controls get tied in so the tower and chillers work together.

  • Electrical. Fan motors, variable frequency drives, disconnects and controls all need the right power. Since we are both a licensed HVAC contractor and a licensed electrical contractor, we handle both sides.

  • Water treatment. The new tower should start clean and stay on a proper treatment program from day one.

  • Permits and inspections. The work is permitted and inspected the way the local building department requires.

You can read more about our chiller and cooling tower work, including replacement and retrofits of chillers, cooling towers, air handlers, RTUs and VRF systems.

Picking the right tower for a coastal hotel

Hotels on or near the beach face salt air that eats metal faster than inland buildings. When we help pick a replacement, we look at materials and coatings that hold up better near the water, how easy the tower will be to maintain, and how much access the hotel's own engineers will have for routine service. A tower that is easy to clean and inspect tends to get cleaned and inspected.

Frequently asked questions

Can a hotel stay open during a cooling tower replacement?

Yes. With temporary cooling, staged work or a multi cell approach, most hotels stay open and keep guests comfortable while the tower is replaced.

How long does a replacement take?

It depends on the size of the tower, the lead time for the new equipment, crane access and how the work has to be staged. We give you a schedule after we look at the site.

Is it better to rebuild or replace?

Sometimes a rebuild with new fill, drift eliminators and fan parts buys years of life. Other times the structure is too far gone. We will look at the tower and tell you which makes more sense.

Do you work outside Broward?

Yes. We work across South Florida, including Broward, Palm Beach and Miami Dade.

Talk to us about your hotel cooling tower

If your hotel's cooling tower is leaking, running hot or costing more every season, call us at 954.577.7923. Our office at 751 Shotgun Rd in Sunrise is open Monday to Friday, 7 AM to 5 PM. We have been doing this since 1999, and we will look at your tower and give you straight options.

Comments


Commenting on this post isn't available anymore. Contact the site owner for more info.
bottom of page