Chiller Service and Replacement for Hotels and Resorts in South Florida
A hotel chiller plant has a harder job than most. Guest rooms run around the clock. Ballrooms go from empty to 500 people in an hour. The kitchen, the laundry and the back of house all pull load at the same time. And the guest who checks in on a July afternoon does not care what the condenser approach is. He cares that the room is cold.
Diplomat Hotel in Hollywood is one of the projects on our list, and hospitality work across Fort Lauderdale beach, Miami Beach, Hollywood and Boca Raton has taught us a few things about keeping hotel plants alive and replacing them when it is time.
Humidity is the real enemy
In South Florida a hotel plant is fighting moisture as much as heat. When chilled water temperature drifts up, rooms still feel cool enough for a while, but humidity climbs. That is how you end up with damp carpet, musty corridors and mold behind vinyl wall covering. Remediation on a few floors costs more than a lot of chiller service.
So the first rule for a hotel: hold your chilled water setpoint and watch it. If the plant cannot hold it on the worst afternoons, that is a capacity or maintenance problem, and it is telling you something.
Service that fits a hotel
The basics are the same as any plant, and we laid them out in our chiller maintenance checklist. Daily logs, oil analysis, tube cleaning, eddy current testing, controls review. For deeper plant work, see our chillers page.
What changes in a hotel is timing. Plan the big annual work, like tube cleaning and teardown inspections, for your lowest occupancy weeks. For most South Florida properties that is late summer into early fall. You lose redundancy for a few days, so make sure the remaining machines can carry the load at that time of year. If you only have one chiller, you need a rental plan before anybody opens a head.
Also look at what breaks hotel plants that office plants rarely see: oversized machines that short cycle at night, controls that nobody has touched since opening, and cooling towers fighting salt air on the coast.
Repair or replace
We get asked this all the time. Our honest answer is that age alone does not decide it. These do:
Refrigerant. R-22 production ended in the United States in 2020. Machines on R-123 can still be serviced, but the supply of new R-123 for servicing goes to zero in 2030. Plan your exit from those refrigerants before a leak forces it.
Tube condition. If eddy current results keep getting worse, you are on a clock.
Compressor history. One rebuild is maintenance. A second one on an old machine is a signal.
Efficiency. Newer chillers, especially with variable speed drives, often use far less energy at part load, which is where hotel plants spend most of their hours.
There is also a federal rule to know. Since January 1, 2025, new comfort cooling chillers made or imported in the United States cannot use HFC refrigerants with a global warming potential of 700 or higher. That shapes what is on the market, so confirm refrigerant choice and service support with the manufacturer up front.
Planning a replacement in an open hotel
Most hotels never close for a chiller swap. Here is what makes that possible.
Temporary cooling. Rental chillers, pumps and hose or piping connections, sized for the season you are working in. Where they sit, how they get power, and how loud they are near guest rooms all need answers.
Rigging. Old machines come out and new ones go in through the same hole, and sometimes there is no hole. Wall openings, crane picks, street or lane closures and city permits all have lead time. On beachfront properties, staging space is tight.
Electrical. A new chiller often means a new starter or drive, new feeders, and protection settings that match. This is where having electrical and HVAC under one roof pays off. We hold both licenses, so there is no finger pointing over who owns the power to the machine.
Lead time. Large chillers are built to order. Get delivery dates in writing and build the project around them, not around the date you wish you had.
Guests. Noise, crane days and any planned cooling interruptions get coordinated with the general manager and front desk. Nobody wants to explain a crane over the pool deck to a wedding party.
Do not forget the rest of the plant
A new chiller fed by a tired cooling tower and worn pumps will not perform. Look at the tower, the pumps, the controls and the water treatment as part of the same decision. Our post on cooling tower rebuild or replacement covers the tower side.
Call us before the plant decides for you
Pacman HVAC Electric Fire has worked from Sunrise since 1999 under A/C license CAC1825204 and electrical license EC13006438, serving hotels and resorts across Broward, Palm Beach and Miami Dade.
Frequently asked questions
When should a hotel replace a chiller instead of repairing it?
Age alone does not decide it. Look at refrigerant (R-22 is gone, R-123 servicing supply ends in 2030), tube condition from eddy current testing, compressor rebuild history, and part load efficiency. A second rebuild on an old machine, or tubes that keep getting worse, usually means replace.
Why does temporary cooling matter during a hotel chiller swap?
Most hotels never close for the work. Rental chillers, pumps and connections keep guest rooms and common areas cool while the old machine comes out and the new one goes in. Where the rental sits, how it gets power, and how loud it is near guest rooms all need answers before the crane day.
What changed for new chillers in 2025?
Since January 1, 2025, new comfort cooling chillers made or imported in the United States cannot use HFC refrigerants with a global warming potential of 700 or higher. That shapes what is on the market, so confirm refrigerant choice and long term service support with the manufacturer before you order.
Call 954.577.7923, Monday to Friday 7 AM to 5 PM, or request a quote. For ongoing service on hotel plants, we can put a maintenance plan in place before peak season.




Comments