top of page

Design Build Electrical and HVAC in South Florida: How It Works

4 days ago
4 min read

Most building owners have lived through it at least once. The engineer draws the job, the contractor bids it, the bids come in high, the drawings get changed, and by the time anyone is turning a wrench the schedule is already behind. Then the change orders start. Design build is a different way to run the job, and for electrical and HVAC work on large buildings it often makes a lot of sense.

We handle design build electrical, HVAC and fire alarm construction across Broward, Palm Beach and Miami Dade. Here is how it works, where it fits best and what owners should ask before they go that route.

What design build means

In a design build job, one team is responsible for both the design and the installation. Instead of hiring an engineer to draw everything and then putting the drawings out to bid, the owner brings in a contractor who works with the design professionals from the start. The people who will install the gear help decide what gear gets installed and how.

That does not mean skipping engineering or permits. Drawings still get prepared and sealed where the building department requires it, and the work still gets permitted and inspected. The difference is that the design is shaped by people who know what it takes to build it, what equipment is actually available and what it costs today.

Why it works well for electrical and HVAC

Electrical and mechanical systems are where a lot of the money and the risk sit in a commercial job. A few reasons design build fits them:

  • Equipment lead times. Switchgear, generators, chillers and air handlers can take a long time to arrive. When the builder is part of the design, equipment can be selected and ordered early, around what is really available.

  • Coordination. Electrical and HVAC have to line up. Chillers, cooling towers, air handlers, RTUs and VRF systems all need the right power, the right controls and the right path into the building. One team means fewer gaps between trades.

  • Fewer surprises. A contractor who walks the building before the design is finished catches the problems that do not show up on old drawings, like a full electrical room or a roof that needs support for new equipment.

  • One point of contact. The owner is not stuck in the middle between the engineer and the contractor when something does not fit.

Where design build fits best

Design build is a good match for jobs like these:

  • Equipment replacement and retrofits. Replacing a chiller plant, a cooling tower, rooftop units or a large switchgear lineup, where the new equipment has to fit the existing building.

  • Full building renovations. Upgrading the electrical and HVAC systems in an older building, often while parts of it stay open.

  • Generator installation or replacement. Sizing, placing and tying in a new generator and transfer switches.

  • Occupied buildings. Hospitals, assisted living facilities, hotels and manufacturing plants that cannot shut down while the work gets done.

It is less of a fit when the owner already has a complete, finished set of drawings and just wants the lowest price on that exact scope. In that case a straight bid can make sense.

How a design build job usually runs

Every project is different, but the steps tend to look like this:

  1. Walk the site. We look at the existing gear, the electrical room, the mechanical room and the roof, and talk with the facility team about what is failing and what they need.

  2. Set the scope and budget. We put together a clear scope and a budget range early, so the owner can make decisions before money is spent on full drawings.

  3. Design. The design gets developed with the equipment, the phasing and the schedule in mind, and gets sealed where it needs to be.

  4. Permit and order. Permits get pulled and long lead equipment gets ordered as soon as the design allows.

  5. Build in phases. Work gets scheduled around the building, with planned shutdowns and temporary power or cooling where it is needed.

  6. Start up and turn over. Equipment gets started, tested and inspected, and the owner gets the documents and training to run it.

What owners should ask

Before you hire anyone for a design build job, ask a few direct questions:

  • Who is on the design side, and how involved will the installing crews be?

  • How will the budget be tracked as the design develops?

  • What equipment has long lead times, and when will it be ordered?

  • How will the work be phased if the building stays open?

  • Who holds the licenses for the electrical, HVAC and fire alarm work?

The answers tell you a lot about whether the team has done this kind of work before.

Why owners call Pacman

Pacman HVAC Electric Fire has been in business since 1999. We hold Florida licenses EC13006438 for electrical and fire alarm work and CAC1825204 for HVAC, so the electrical, HVAC and fire alarm construction can be handled by one contractor. That matters on design build work, because the same team that helps plan the job is the team that installs it. You can see more about our construction and renovation work on our site.

FAQ

Is design build more expensive?

Not necessarily. Because the builder helps shape the design, the owner usually sees real pricing earlier and avoids paying to redesign a job that came in over budget.

Do design build jobs still need permits and inspections?

Yes. The work is permitted and inspected the same as any other job, and drawings get sealed where the building department requires it.

Can design build work be done in an occupied building?

Yes. A lot of our work is in buildings that stay open. Phasing, planned shutdowns and temporary power or cooling are part of the plan from the start.

What areas do you cover?

We work across South Florida, including Broward, Palm Beach and Miami Dade. Our office is at 751 Shotgun Rd, Sunrise FL 33326.

Talk to us about your project

If you are planning an electrical or HVAC upgrade, a renovation or an equipment replacement, call us at 954.577.7923. Our office is open Monday to Friday, 7 AM to 5 PM. We will walk the site, talk through the options and help you decide if design build is the right fit.

Comments


Commenting on this post isn't available anymore. Contact the site owner for more info.
bottom of page